Nisei Engineering > Forum > View topic

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

Here our pictures of the other battery we will be offering effective 6/1/2005:

This battery is a UBC battery (manufactured by Universal Power Group) www.UBCBattery.com. Also makers of Panasonic batteries.

Battery Spec's: http://www.ubcbattery.com/batteries/sla.aspx

Battery Model #: D5726

This battery has a few more amps than the Genesis & posses 420 CCA's (Cold Cranking Amps) for those in colder climates.

Requires slight Modification to battery top, which will be done before unit is shipped out! Note: About 3/16" notch for bracket brace. See Photos below.

Since we our out of the Enersys Genesis series battery we will be offering this UPGRADE at NO ADDITIONAL CHARGE! For a LIMITED TIME! (until the Genesis returns to stock).

Pricing as follows: (FOR A LIMITED TIME!)

All kits IN STOCK! $225

Stock as of 6/1/2005:

POLISHED - 5 pcs.
NISEI BLACK - 8 pcs.
MATTE BLACK - 0 pcs

NOTE: Since we our OUT OF STOCK on the MATTE BLACK Trays, we will be EXTENDING the $225 price for those who PRE-ORDER & have PAYMENTS RECEIVED by 6/15/2005! After that pricing will return to $240 for Matte Black!

Thanks for your support!

Joined: 14 Jun 2005 Posts: 7

Will this kit fit the Braille 11lbs. battery? I have this battery and do not want to do any trimming. If it fits effectively, I will buy...(money in hand)

Karash

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

The battery tray is 7 1/8" I.D. (Length) x 3 1/16" I.D. (Width). The UBC battery is 7"L x 2 15/16" W x 6 9/16"H.

See photos below:

Check the "battery top". The bracket brace is 2 5/8" wide.

Refer to photo :

Hope this helps out. If you need more info do not hesitate to contact me or post again.

Joined: 14 Jun 2005 Posts: 7

How tall are the studs on each side? Actually how tall is that battery you modeled the product after?

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

The battery is 6 9/16" tall. The posts on the side can be easily modified / shortened. The threads run approximately 3/4" deep (both sides)for the studs, so there is plenty of room for modification.

I did Google the Brallie battery this morning for specifications. If this description is accurate then the Brallie battery will NOT work. Mainly because of it's width coming in at 3.3". The tray itself is 3.125"wide.
Here is a link to some of the specifications I've found :

http://mastrowrx.com/index.asp?PageAction=VIEWPROD&ProdID=244

If you really have interest in the tray assembly let me know. I will be running a new batch as well as developing 1 or 2 more trays. If the dimensions I have are accurate and you confirm them. It will be no problem to make a couple specifically for the Brallie.

Conditions to make this happen :

* Call me direct line (310) 408-2767.
* Payment must be received before development begins.
* All dimensions must be confirmed.
* Specify color desired.
* You will have to be understanding of the time frame. Meaning that I will agree to this BUT I will have to schedule it around our production time tables.

Again if you want a "custom tray" give me a call and we'll try to work something out.

Thanks!

Kevin,

Joined: 14 Jun 2005 Posts: 7

Hey Kevin,

Any word on those Braille trays this month yet? Thanks!

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

Sorry for the delay in response, just got my new internet up tonite! Anyway regarding the Braille Tray. The fitment went well but I've got one last fitment scheduled for this weekend or latest Monday.

I will post pix up for you with the Braille installed with the "raw unfinished aluminum" by early next week.

The last thing after that will be polishing / anodizing.

Joined: 14 Jun 2005 Posts: 7

Ok let me know when I can call and order.

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

Ok heres the latest.

Regarding the Braille Tray when we did the quick check fitment install but, I forgot to bring the camera.

Just sent them out for polishing today should have some back tomorrow. As soon as I can schedule the time for photo shoot I'll have it done.

Keep you guys posted!

Joined: 14 Jun 2005 Posts: 7

Catch Can? Very Happy

Looking forward to calling Rob on this. Thanks for the service Kevin.

(This is my catch can setup...pretty rigged, thats why im looking for something cleaner)

**Nisei Team** Joined: 25 Apr 2005 Posts: 115

Joe,

Pix of Braille tray in unfinished Aluminum. Sorry I didn't get any pix of it with the Braille installed.

Spoke to the polishers this morning and they will be calling me back with final pricing shorty (so they say).

Once quotation is received I will be able to give you a final price!

Call me up if you have any questions.

**Nisei Team** Joined: 25 Apr 2005 Posts: 115