| Author |
Message |
| < Intercooler > New Nisei Competition FMIC Installed- 56k No No |
|
 Posted:
Fri Jul 21, 2006 2:29 pm
|
|
|
Joined: 22 Mar 2006
Posts: 9
|
|
Also Posted this on EvoM
and on a Side Note at first My first install of the Nisei Street FMIC, Mini Battery Kit and Intercooler Red Piping Kit and Pics are in the Product Feedback section- Every part I have ever gotten from them is truely engineered to perfection- I cant wait till that new thing you were telling me about Kevin is released!!! 
So I received the new Nisei Competition FMIC from Kevin at Nisei after deciding to upgrade and sell my Nisei Street FMIC and get the new Competition one(can also be ordered from The Evo Store)...I must say the packaging was great, no bent fins- beautifull cast and polished end tanks that are super strong (Ive seen numerous FMIC from other companies like Buschur come to the customer with tons of bent fins and the end tanks that were welded were all bent and needed to be brought to a Muffler shop to be fixed)...<--and that is one main Reason why to go with Nisei.
Install.... install went perfect and fitment even though the new core was a half inch wider went great.. took only about a half an hour to switch out the cores and tighten everything up once the front bumper was off--Crash bar fit over the Unit like this FMIC came with the car stock...
First Driving Impression... I run Zeitronix datalogging software with Medical Grade Boost sensor and believe it or not my datalog compared to yesterday (same temps and around same time of day) only thing changed was the FMIC - Boost was up .7 psi and it reached the higher number about 150rpms sooner.. Couldnt be happier with the unit and the guys at Nisei.
Now Heres the Pictures--
Street Core on the Left : Comp on the Right
Street FMIC Width
Competition Width
Street Cold Side Outlet
Competition Cold Side Outlet
Crash Beam Installed
Front Bumper Installed
|
|
|
|
|
 |
|
| Posted:
Mon Jul 24, 2006 7:22 am
|
|
|
Joined: 03 Jul 2006
Posts: 3
Location: KC
|
|
| Did you have to modifty the bumper at all? I'm having problems getting my bumper on. |
|
|
|
|
|
|
| Posted:
Mon Jul 24, 2006 7:35 am
|
|
|
Joined: 22 Mar 2006
Posts: 9
|
|
| No bumper fit right on- Make sure one of ur t-bolt clamps where the intercooler piping connects to the intercooler isnt protruding out and stoping the bumper from fitting on right |
|
|
|
|
|
|
| Posted:
Mon Jul 24, 2006 11:17 pm
|
|
|
Joined: 03 Jul 2006
Posts: 3
Location: KC
|
|
The bumper bracket that holds on the mesh screen is hitting the end tanks of my intercooler (problem area circled in yellow).
|
|
|
|
|
|
|
|
All times are GMT - 8 Hours |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
